 |
|
|
|
 |
 |
 |
|
|
|
|
|
|
|
|
|
 |
SERIES 248 IMPACT SLIDING GLASS DOOR | ||||
 |
General Specifications General: Door shall be designed and manufactured to meet residential applications per Dade County product approval. Materials: All frame and sash members shall be extruded 6063-T6 aluminum alloy. Frame members shall have a minimum depth of 5”. Panel members shall have a minimum depth of 1”. (Available in White, Bronze or Anodized Finish) Construction: Frame members shall be field assembled with stainless steel screws. Panel horizontal members telescope into vertical members and are coped and assembled with stainless steel screws. Hardware: Panels shall have (2) stainless steel ball bearing adjustable rollers at bottom. Active panel shall have a chrome interior and exterior recessed handle. Glazing: Panels shall be factory glazed with structural silicone and 7/16” laminated glass. (Available in Clear, Obscure, Green, Grey or Bronze Tint) Weatherstripping: An interior vinyl flap and exterior wool pile shall be used at each frame jamb. All panels shall be weatherstripped with vinyl flap at top and bottom rails. Insect Screen: Frame shall be extruded aluminum sections, 1” deep with a 18 x 16 fiberglass mesh. Horizontal members telescope into vertical members and are assembled with stainless steel screws. Screen shall have (2) stainless steel ball bearing adjustable rollers at bottom rail and two spring nylon rollers at top rail. Screen will have interior and exterior chrome handle with interior night latch. * All 4 panel configurations require a 2 x 6 fixed mull in the middle of active panels as shown in picture above. 
|
||||
 |
|||||
|
|||||
